CDA Carbon Dynamic Airbox
The CDA filtering system is composed of a cylindrical carbon fibre airbox containing a washable filtering element. The choice of this
composite material is due to the fact that carbon has low thermal conductivity allowing insulation from the engine heat to the aspirated air.
Replacing the original airbox with the CDA means that fresh air is channelled directly to the filter, thermally insulated inside the carbon
airbox and then conveyed to the engine through an air flow deflector with minimum loss of power (patented system).
The kit also contains a flexible aluminium tube (60 cm. length) to connect the CDA system to a frontal air intake. The CDA was created as a universal system fitting most kinds of car; the different applications are completed by a wide range of accessories that are necessary for the installation. The CDA is available in two versions: the first with an external diameter of 130 mm which is recommended for engines of up to 1600 cc. and the second with an external diameter of 150 mm. for greater displacements.
The CDA filtration system is connected to a frontal air intake via a flexible aluminium tube. Thanks to the dynamic air intake you get a real supercharging system that conveys fresh air to the air box at a speed and capacity greater than that of traditional systems. The air flow entering the dynamic air intake is accelerated further thanks to the air flow deflector inside the carbon fibre airbox. Dynamic over-boosting, greater air flow, higher pressure and colder air are the elements which help to significantly increase the performance of the engine both in terms of power and torque, as demonstrated by dyno tests carried out. The CDA is also available in a number of special versions with specific flanges for direct connection to the air sensor or with different dimensions according to the model of the car.
The CDA Dynamic Air Box is available in two versions:
The kit also contains a flexible aluminium tube (60 cm. length) to connect the CDA system to a frontal air intake. The CDA was created as a universal system fitting most kinds of car; the different applications are completed by a wide range of accessories that are necessary for the installation. The CDA is available in two versions: the first with an external diameter of 130 mm which is recommended for engines of up to 1600 cc. and the second with an external diameter of 150 mm. for greater displacements.
The CDA filtration system is connected to a frontal air intake via a flexible aluminium tube. Thanks to the dynamic air intake you get a real supercharging system that conveys fresh air to the air box at a speed and capacity greater than that of traditional systems. The air flow entering the dynamic air intake is accelerated further thanks to the air flow deflector inside the carbon fibre airbox. Dynamic over-boosting, greater air flow, higher pressure and colder air are the elements which help to significantly increase the performance of the engine both in terms of power and torque, as demonstrated by dyno tests carried out. The CDA is also available in a number of special versions with specific flanges for direct connection to the air sensor or with different dimensions according to the model of the car.
The CDA Dynamic Air Box is available in two versions:
- Part No. without "T" (e.g. ACCDASP-01) = Not allowed for street use in Germany.
- Part No. with "T" (e.g. ACCDASP-09T2) = With approval according to 19.3
Items 1 - 20 of 20
Items 1 - 20 of 20